home *** CD-ROM | disk | FTP | other *** search
- Hi All,
-
- Consider this post a desperate plea for help. I'll outline as clear
- as possible, and ask (beg) that someone can help me figure this out
- before I go insane. TIA
-
- Problem:
- When I render frames in LW 3.1 my system occasionally crashes. I get
- GURU # 81000005 and then task number such as:
- 011D4D30 01068BE0 0176FAF8
- 0113CD68 0173A428 011C1450
- 0104CD78 011C7BC8
- 011C7978 011373D0
-
- A program I have defines the Guru # to mean "AN_MEM Corrupt. Corrupt
- Memory List Detected In FreeMEM()"
-
- The bizarre part is I can't tell you exactly when this happens??
- Sometimes I will render about 20 frames then the crash, other times
- 2 frames then the crash. I have tried to re-render a frame it crashed
- on to see if it was something specific to the frame, but it will work
- if I render it again. I can not find a pattern, or find the exact
- operation that makes it crash.
-
- My Setup:
- Amiga 2000HD
- GVP 030/25Mhz with 9 megs of 32bit ram and SCSI controller
- A2091 board which has 2 megs of 16bit ram
- Toaster 1.0 card with 3.1 Software
- Syquest 88meg exterbal
- 350 meg internal scsi drive
- 50 meg internal scsi drive
- I am recording directly to Sanyo 950 (I am not saving frames to any
- drive)
- Kickstart 2.1 rom
- Workbenck 2.1
-
- What I have tried:
- I have run every memory check program I can find, and they all report
- no errors.
- I have disabled the 2 megs of 16bit ram on a tip that might cause the
- problem.
- I have moved the memory chips around on my GVP board to see if the
- TASK number changes, it doesn't.
- Called Newtek support.
- Run a memory block program to disable the memory areas reported by
- the task numbers.
-
- AND NOTHING STOPS THOSE VISITS FROM THE GURU!!!
-
- Well, if you have made it this far I thank you for at least letting
- me vent. If you have any ideas or guesses please let me know.
-
- Thanks much,
- Dan "I can't take these GURU visits" Nessel
- nesseld@ios.com
-
-
-
-
-
-